01-1030-H-A-P, LIGHT, Landing, with Pulse, SunSpot 36HX, ProTech Lens Coating

SunSpot™ 36 HX Landing Light with ProTect Lense Coat

Built-in Pulse Mode

Higher color temperature - White

Technical Specifications: 

• Power Consumption: 45W
• Voltage Range: 9-30.3V
• Lumens: 4,950
• Candela: 65,000
• Beam Profile: 20' x 20'
• Weight: 10.1 oz
• Dimensions: 4.4" x 4.4" x 1.9"

SunSpot 36 HX Landing Light is designed as an LED drop-in replacement for existing legacy lights. The HX version includes an integrated Pulse or WigWag feature that helps significantly increase recognition in broad daylight and night operations. These features also help avoid midair collisions and bird strikes, while reducing the load on the electrical system by 50%. The SunSpot 36 LX/HX Landing Lights will fit all PAR36 configurations.

Note: P/N 01-1030-H-A-P is available without ProTect lens coat, use P/N 01-1030-H-A.

Sunspot FAA-PMA/STC Landing and Taxi Lights

Drop-in replacement for PAR36, 46, 27 and 64

Almost twice the light for 1/3 the power!

• Huge power savings
• Light weight
• Less heat
• Whiter light - more like daylight
• Improved safety with pulse recognition mode
• Long life - over 50,000 hours!
• FAA certified
• Incandescent Bulb Cross Reference for Landing and Taxi Lights
• Catalog Information

Available as a drop-in replacement for PAR36, PAR46, PAR27, and PAR64 configurations with several options that are FAA/PMA/STC certified. The AeroLEDs Sunspot Series LED Landing and Taxi Lights consume less power, output more lumens (total light output) and are not affected by vibration compared to incandescent bulbs. These attributes make the SunSpot ideal for use in Experimental, Certified, Commercial, ARFF, and Military aircraft. The HX version includes an integrated Pulse or WigWag feature that helps greatly increase recognition in broad daylight as well as night operation to help avoid midair collisions. Additionally, while in the recognition mode, SunSpot’s draw half the current. The SunSpot series lights are designed to be mounted in the wingtips, leading edge, cowling, or on the landing gear.

Pulse Recognition Mode.

AeroLED lights with pulse mode (or wig-wag mode) greatly improve safety by alternately blinking the left then right light once per second. This dramatically increases your aircraft visibility to prevent both air and ground collisions. At least one 36HX or 46HX series light must be installed to enable pulse mode.